Intake Manifold Workshop
Courtesy of: Mance Etheredge

1. Intro...
2. Blueprinting teaser...
3. FYI: Which power grinder to buy? 
4. How To: DIY acid bath... 
5. Lower IM after cleaning... 
6. Ok guys this is where the fun starts. 
7. Project starting...
8. Just when I thought I had it all done... 
9. Initial tool list for manifold...
10. Pics from todays work... 
11. FlexHone grit test...
12. Throttle Body inlet coarse work... 
13. Switchover secondary runners... 
14. After honing... 
15. Update on boring/grinding/honing & polishing tools...
16. I've got some good news and some bad news regarding the EGR provision....
17. One runner in the IM cover is complete! 
18. Something else you'll need...
19. First Stage flex hone of EGR passage...
20. MAJOR UPDATE for all interested. HUGE DISCOVERY!!
21. EGR passage finished...
22. I'm going to try to get Joe Mondello and/or the Mondello Technical School involved....
23. Porting Tools List...
24. A couple of required items for the IM workshop... 
25. Tapping Brake Boost port when using earlier IM on later cars...
26. Pre-Glyptal prep, filling and media blasting...
27. Glyptal first coat...
28. Insulating the lower half of IM...
29. More optional ideas related to efficiency... 
30. Ok, here's the vac recovery kit, what it'll cost and how to install it...
31. Making the EGR polishing sticks...
32. Completion of IM top half and re-assembly...
33. Adjusting manifold switchover butterfly gap...